To meet the demand for high performance, high integration and improved maintenance performance in industrial control, OMRON has introduced a new highly scalable and compact integrated programmable logic controller (PLC), SYSMAC CP1H , Mainly including CP1H-X (standard), CP1H-XA (analog built-in) and CP1H-Y (high-speed positioning) these three models. The CP1H incorporates various functions of the CS / CJ into a single unit, augmenting the versatility of built-in functions, enhancing application capabilities and reducing the design time for additional complex programs. With many new features, this new, compact PLC can be used in a variety of industrial applications such as textiles, packaging, food, printing, and other applications that require drive functions, of. The CP1H is located in the minicomputer, but it is based on the CS / CJ (especially CJ, CJ is a medium-sized PLC platform) platform, it has many midrange features such as pulse output and analog output. Omron previously introduced PLC in the traditional sense of the high-end and low-end products, and like SYSMACCP1H such a small integrated multi-function medium-sized PLC is very small, so the introduction of CP1H is of great significance, it Omron make up an important part of the product chain, making Omron's entire PLC product chain more complete. The CP1H supports the standard DeviceNet fieldbus and extends a wide range of I / O functions such as integrated high-speed pulse output with 4 axes as standard. The counter functions as standard with a 4-axis phase difference method. The Universal USB 1.1 with Parallel The ports are also standard equipped; more importantly, the CP1H features serial communication, which is mainly achieved by two ports, the freely selectable RS-232C and RS-485. In addition, CP1H-XA also supports 4-channel input / 2 channel output analog input / output function, which allows the same CPU can also monitor the analog, which is suitable for a variety of devices used in plane inspection, component production The small mistake (such as loose screws, etc.) to prevent tools, as well as the molding machine hydraulic control and other occasions. These I / O functions allow users to choose according to the specific application needs and cost constraints, and can be extended to a variety of other applications, such as Ethernet, which fully demonstrates the high flexibility of the SYSMAC CP1H. The standard 4-axis high-speed pulse output capability of the CP1H provides advantages in high-precision positioning and is particularly suitable for the assembly of electrolytic capacitors in electronic product manufacturing equipment and in the case of paper feed of packaging machines. The CP1H-X series can implement high-speed pulse output of 100kHz × 2 axes and 30 kHz × 2 axes. The CP1H-Y has a built-in 1MHz linear driver input / output and 20 points (12 inputs, 8 outputs) General-purpose input / output, to achieve 100kHz × 2 axis and 30 kHz × 2-axis pulse output function. The high-speed counter function of the CP1H makes it particularly suitable for applications such as spindle control of textile machines, textile machines, building materials manufacturing machines and stone cutting machines. Its built-in 8-point input interrupt function, and pulse width of 50μs pulse capture capability. CP1H can do one-way counting 10kHz, then you can use the maximum 100kHz × 4-axis and 10kHz × 8 axis, a total of 12-axis counter. These features make CP1H and Omron earlier CPM2A compared to more than 6 times the basic instructions, while MOV instructions increased by 26 times. Not only the basic instructions, application instructions have also achieved high speed, which are all for the equipment to speed up the overall help. The CP1H is equipped with a standard USB1.1 port and two serial communication interfaces (RS-232C and RS-485). Between the CP, various components (inverter, thermostat and smart sensor), and between PLCs While the serial connection, but also easy to achieve with the computer connection. Such as in the control of multiple boilers, the need for a variety of devices to set and monitor, then, CP1H up to 9 can be achieved within 10 channels of data exchange. However, the serial PLC link function can only take effect on one of the two serial ports of the CP1H. CP1H CPU is based on the CJ platform, although located in the minicomputer applications, but the speed and processing functions have been far more than minicomputers, so compared with the minicomputer has obvious performance advantages, which deal with a basic instruction The time required is only 0.1μs, while the time required for a typical small PLC product CPU to process the same instruction is above 0.6μs. Users can choose from different levels of CPU (CP1H-X, CP1H-XA and CP1H-Y) depending on application requirements and cost. Other features of the CP1H include: • Memory cartridge: Program and initial value data can be included for copying to Other devices • 7-segment LED status display • Low battery operation: The built-in flash memory of the CPU can save and output initial values for all DM areas (32kW) at power-on • Program capacity up to 20k steps • Up to 320 I / O and 37 Analogs In software, the CP1H can shorten the time required to add complex programming. Thanks to the CJ's programming environment, the FB-ST programming functions are supported. Contains a variety of function blocks. When the user needs to connect another intelligent control system, there is no need for a lot of programs to set various parameters, only the corresponding function blocks can be called out from the library, and the corresponding functions can be automatically realized. The optimized programming environment uses a Structured Text (ST) language to make numerical calculations simpler. Communication programs are provided by Smart FBs (Function Blocks). Ladder programs for various communications are available through Omron's Smart FBs. Will greatly reduce program development and debugging time. In addition to the PLC, both the parameter setting of the high-performance unit and the configuration of various FA networks are provided by using the easy-to-use programming software CX-Programmer, presetting the standard switching blocks (ladder / ST language) for various applications You can set it simply and easily without having to look through the manual. CX-One is an FA tool kit for connecting, setting and programming of Omron components, including the PLC. The CP1H can only be programmed and set using the CX-Programmer. The CX-One includes programming / setup kits for the NS series and temperature controller of the programmable terminal. The CX-One can be used with the CP1H for easy setup and easy programming, thus shortening the installation and commissioning time of the machine and equipment. SYSMAC CP1H plans to mass production in August. Based on its two core technologies ?? sensing and control, Omron offers a full range of PLC products from high-end to low-end applications for a variety of industrial control applications, from pushbuttons, frequency converters, to servo motors, to the market Complete solution. OMRON attaches great importance to the customization of products. By segmenting the market and determining the development of products according to the specific needs of customers, Omron is closer to the market and customers. Currently, Omron's customers in China account for about 10% of its global customer base. Over the past few years, Omron's business in China has grown at an average annual rate of 30%, maintaining an annual growth rate of 30% Strive to quadruple by 2007. In China, the demand for small PLCs is increasing, and its performance is also getting higher and higher. It integrates various functions such as communication functions, analog and pulse processing capabilities, and speed. SYSMAC CP1H has the features and features just to meet the development requirements of the Chinese market.